ug现在有没有和pro/e的专用借口。。。。

只看该作者 · 发表于 2004-3-18 11:00:03

马上注册，结交更多同行朋友，交流，分享，学习。

您需要登录才可以下载或查看，没有帐号？注册

x

谢谢

只看该作者 · 发表于 2004-3-18 14:45:57

是接口还是借口？

只看该作者 · 发表于 2004-3-18 15:28:15

说的都是什么啊？？？？？？？

只看该作者 · 发表于 2004-3-18 16:45:47

接口。。。。。因该是没有的。。。

只看该作者 · 发表于 2004-3-18 17:58:03

step 可以吧

只看该作者 · 发表于 2004-4-2 16:00:54

[ Release Notes ]
  CIMPro-UG is a Pro/ENGINEER-integrated translator product that  allows data exchange from Unigraphics to Pro/ENGINEER.  CIMPro-UG is completely integrated within the Pro/ENGINEER environment using Pro/TOOLKIT and therefore have the same "look and feel" as other Pro/ENGINEER applications.
                                                                          
      Key Features & Benefits
                                                                          
      CIMPro-UG does not require licenses for any of the Unigraphics
      products nor does it require Unigraphics to be on the same
      platform as Pro/ENGINEER for data translation to occur.
      Data translation is an integrated process right on your
     &nbsp

ro/ENGINEER platform.
      CIMPro-UG can run on all hardware and operating system
      platforms supported by Pro/ENGINEER.
      CIMPro-UG accepts native Unigraphics data files without any
      pre-processing or modifications on the Unigraphics side.
                                                                          
      https://www.cimsoftek.com/cimsoftek_products/cimsoftek_products
      .html

只看该作者 · 发表于 2004-4-2 19:17:16

我喜欢STP和IGS

只看该作者 · 发表于 2004-4-2 21:13:34

tsingtsang wrote:
[ Release Notes ]
  CIMPro-UG is a Pro/ENGINEER-integrated translator product that  allows data exchange from Unigraphics to Pro/ENGINEER.  CIMPro-UG is completely integrated within the Pro/ENGINEER environment using Pro/TOOLKIT and therefore have the same "look and feel" as other Pro/ENGINEER applications.

      Key Features & Benefits

      CIMPro-UG does not require licenses for any of the Unigraphics
      products nor does it require Unigraphics to be on the same
      platform as Pro/ENGINEER for data translation to occur.
      Data translation is an integrated process right on your
      Pro/ENGINEER platform.
      CIMPro-UG can run on all hardware and operating system
      platforms supported by Pro/ENGINEER.
      CIMPro-UG accepts native Unigraphics data files without any
      pre-processing or modifications on the Unigraphics side.

      https://www.cimsoftek.com/cimsoftek_products/cimsoftek_products
      .html

这个东东能不能保留特征参数啊？

只看该作者 · 发表于 2004-4-2 21:16:20

chenkuan2004 wrote:
我喜欢STP和IGS

但是那样就失去了模型的特征参数了

你见过有什么软件输入输出模型后还能保留参数吗

只看该作者 · 发表于 2004-4-3 07:53:33

不能保留

ug现在有没有和pro/e的专用借口。。。。

马上注册，结交更多同行朋友，交流，分享，学习。

浏览过的版块