戴姆勒奔驰公司选择NX替代CATIA作为其CAD软件标准

https://www.vancouversun.com/business/Daimler+Selects+Software+from+Siemens+Platform+Worldwide+Truck/3876761/story.html

Daimler Selects CAD-Software from Siemens as New Platform for Worldwide Car and Truck DevelOPMent



BusinessWire ERLANGEN, Germany





With the decision for the NX CAD Software of Siemens, Daimler completes their current implementation of Teamcenter, the company’s product data management backbone. Based on this combination, the automotive manufacturer will establish digital collaboration from initial concept design, through simulation during design, down to proof of concept of design solutions. The consolidation of digital product information in one single worldwide data pool will facilitate new vehicle development. The introduction of parallel processes in development, design, production planning and production will further optimize the entire value chain.
“The combination of NX CAD software with our product data management system Smaragd, which is based on Teamcenter, will integrate our entire product creation process from design through production planning down to managing production machines,” said Prof. Bharat Balasubramanian, who is responsible at Daimler for R&D product innovation and process technology.
With Daimler another vehicle manufacturer decided this year to optimize their worldwide vehicle development process with software solutions from Siemens. By changing to Siemens’ open software solutions, car manufacturers can enhance their quality and efficiency in vehicle design and development.
Modern vehicle design requires an increasing integration of mechanical, electrical and electronic components with an ever expanding software ratio. This requires the integration of all of the information associated with mechanical, electrical and software in an integrated platform to allow for collaboration across the full value chain, including suppliers.
“Our CAD and PLM software will help manufacturers enhance their development processes and their production planning and therefore increase their productivity,” Chuck Grindstaff stated, president and chief technology officer of Siemens PLM Software, a business unit of the Division Industry Automation.
With software from Siemens, car manufacturers can manage the product and production planning in parallel with production, encompassing the entire value chain. Daimler has worked with Siemens’ Teamcenter software for collaborative product data management since the mid 90s.
With NX CAD software from Siemens, Daimler will implement a computer-based tool for the entire product development process and therefore a solution for collaborative design, engineering- and development work.
Today Siemens is one of the leading suppliers of PLM software with 6.7 million licenses and 69.500 customers around the world. The market for PLM software is exhibiting stronger growth than any other business software market. In 2009 the market had a volume of

关注一下，，

fjp0931 发表于 2010-11-26 08:49
CATIA的所谓技术优势就是轻量化，其他感觉就像PROE,真正会UG的人是不屑一顾的

虽然CATIA确实功能很强大，但是NX更强大。

CATIA的所谓技术优势就是轻量化，其他感觉就像PROE,真正会UG的人是不屑一顾的

长见识了!!!

小人大志 发表于 2010-11-25 17:57
NX在汽车行业中感觉都很完善啊

还要继续努力，CATIA市场份额仍然超过NX，不过几年后可能会改变。关注BMW, VW, Toyota.

NX在汽车行业中感觉都很完善啊

继续关注NX在汽车行业中的表现

路过的来看看。

zhangpeijian 发表于 2010-11-25 17:00
支持NX，其实NX还有很多缺陷呀。不要自满。

有了大客户，大客户会给funding让完善。很多人用用d版，享受免费方便了。