ToolBox智能扣件螺钉安装反向的原因揭示

只看该作者 · 发表于 2007-7-10 14:57:34

SW2007的ToolBox终于提供的GB标准件，
但是使用中发现有时智能扣件安装的螺钉会反向，
如图：

来自手机 · 发表于 2014-12-18 17:32:28

感觉总会生成错误的螺栓啊

只看该作者 · 发表于 2014-4-26 08:36:49

ductpost 1.5.10 initialised
               ************************
               * DUCTPOST VERSION 1.5 *
               * Revision 10 BETA *
               ************************

Copyright (c) Delcam plc, Birmingham, England
1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
2001, 2002, 2003, 2004, 2005, 2006, 2007

Using option file C:\dcam\config\pass\ductpost\fanuc10m.opt
Using built-in fanuc10m
Reading cutfile records
500 records read
1000 records read
1500 records read
2000 records read
2443 records read
1 Records Processed (0 percent complete)
123 Records Processed (5 percent complete)
246 Records Processed (10 percent complete)
369 Records Processed (15 percent complete)
492 Records Processed (20 percent complete)
615 Records Processed (25 percent complete)
738 Records Processed (30 percent complete)
861 Records Processed (35 percent complete)
984 Records Processed (40 percent complete)
1107 Records Processed (45 percent complete)
1230 Records Processed (50 percent complete)
1353 Records Processed (55 percent complete)
1476 Records Processed (60 percent complete)
1599 Records Processed (65 percent complete)
1722 Records Processed (70 percent complete)
1845 Records Processed (75 percent complete)
1968 Records Processed (80 percent complete)
2091 Records Processed (85 percent complete)
2214 Records Processed (90 percent complete)
2337 Records Processed (95 percent complete)
2443 Records Processed (100 percent complete)
      *****************************************
      *                                     *
      *  POSTPROCESSING TERMINATED          *
      *                                     *
      *  NUMBER OF BLOCKS       11144    *
      *                                     *
      *  TOTAL TIME                9.4    *
      *                                     *
      *  TAPE LENGTH (FEET)    1473.0    *
      *                                     *
      *  NUMBER OF CHARACTERS    176764    *
      *                                     *
      *****************************************
Complete

只看该作者 · 发表于 2010-5-2 12:41:55

好像还是有问题的，我试了还是装反的！！点右键没有对应的反转选项！！

本帖最后由 davise24 于 2010-5-2 12:43 编辑

只看该作者 · 发表于 2007-10-19 16:53:20

新手上路不简单。。。回帖

只看该作者 · 发表于 2007-8-26 15:57:44

还有标准件太多时一旦出错不容易修复

只看该作者 · 发表于 2007-8-17 00:43:45

来个阵列螺旋楼梯

只看该作者 · 发表于 2007-8-13 21:31:29

确实有问题
toolbox的gb库有几个还不是同心的
改改用吧

只看该作者 · 发表于 2007-8-13 15:04:47

授教了多谢指点

只看该作者 · 发表于 2007-8-3 23:06:38

遇到不少这样问题，谢谢解答

[原创] ToolBox智能扣件螺钉安装反向的原因揭示

本帖子中包含更多资源

浏览过的版块