西门子802S的处理有人使用吗

我也好想用Proe做加工
网上只找到Cimatron的802S后处理
可是没的西门子802S的后处理
我自己又搞不定
那位高手来帮忙
非常感谢
请发到论坛或发我的邮箱 ly4299833@163.com
感谢中

[ 本帖最后由 jiugaosie 于 2006-8-2 13:39 编辑 ]

有啊

我以前用过

{:soso_e140:}

很好

都是高手……

是心形的   哈哈 有要的联系我 438391431

我做的%
N25 G17 S800 T1 D1 G57 G90
N30 G0 X0 Y0
N35 Z20
N40 X-39.9 Y-8.5
N45 Z10
N50 Z0.1
N55 G1 Z-4.9 F300
N60 Y-26.2
N65 X-39.6 Y-26.8
N70 X-38.0 Y-29.4
N75 X-35.9 Y-31.7
N80 Y-3.0
N85 X-31.9 Y1.2
N90 Y-34.7
N95 X-30.8 Y-35.3
N100 X-27.9 Y-36.5
N105 Y5.3
N110 X-23.9 Y9.4
N115 Y-37.3
N120 X-23.0 Y-37.3
N125 X-19.9 Y-37.3
N130 Y13.6
N135 X-15.9 Y17.7
N140 Y-36.4
N145 X-14.7 Y-36.0
N150 X-11.9 Y-34.6
N155 Y21.9
N160 X-7.9 Y26.0
N165 Y-31.6
N170 X-6.1 Y-29.5
N175 X-4.4 Y-26.9
N180 X-3.9 Y-26.1
N185 Y30.1
N190 X0 Y34.2
N195 X0.1 Y34.2
N200 Y-24.2
N205 X.1 Y-24.2
N210 X1.6 Y-24.5
N215 X3.0 Y-25.2
N220 X4.1 Y-26.3
N225 Y30.0
N230 X8.1 Y25.9
N235 Y-31.7
N240 X9.5 Y-33.0
N245 X12.1 Y-34.7
N250 Y21.7
N255 X16.1 Y17.6
N260 Y-36.5
N265 X17.0 Y-36.7
N270 X20.1 Y-37.3
N275 Y13.4
N280 X24.1 Y9.3
N285 Y-37.3
N290 X25.1 Y-37.1
N295 X28.1 Y-36.4
N300 Y5.2
N305 X32.1 Y1.0
N310 Y-34.7
N315 X33.7 Y-33.6
N320 X36.1 Y-31.6
N325 Y-3.1
N330 X36.2 Y-3.2
N335 X37.5 Y-4.8
N340 X39.3 Y-7.3
N345 X40.1 Y-8.7
N350 Y-26.0
N355 Z10.0
N360 G0 X-14.0 Y19.8
N365 Z0.1
N370 G1 Z-4.9 F300
N375 X-36.2 Y-3.2
N380 X-36.3 Y-3.4
N385 X-36.5 Y-3.5
N390 X-37.5 Y-4.8
N395 X-38.7 Y-6.3
N400 X-39.6 Y-7.8
N405 X-40.3 Y-9.2
N410 X-41.0 Y-11.2
N415 X-41.5 Y-13.0
N420 X-41.9 Y-15.1
N425 X-42.0 Y-16.9
N430 X-41.9 Y-19.1
N435 X-41.7 Y-21.1
N440 X-41.2 Y-23.0
N445 X-40.6 Y-24.9
N450 X-39.7 Y-26.7
N455 X-38.7 Y-28.3
N460 X-37.6 Y-29.9
N465 X-36.4 Y-31.2
N470 X-35.1 Y-32.5
N475 X-33.8 Y-33.5
N480 X-32.4 Y-34.5
N485 X-30.8 Y-35.3
N490 X-29.2 Y-36.0
N495 X-27.4 Y-36.6
N500 X-25.5 Y-37.1
N505 X-23.7 Y-37.3
N510 X-21.6 Y-37.4
N515 X-19.6 Y-37.2
N520 X-17.6 Y-36.9
N525 X-15.6 Y-36.3
N530 X-13.8 Y-35.6
N535 X-12.0 Y-34.7
N540 X-10.4 Y-33.6
N545 X-8.9 Y-32.4
N550 X-7.5 Y-31.2
N555 X-6.3 Y-29.7
N560 X-5.4 Y-28.5
N565 X-4.4 Y-26.9
N570 X-4.3 Y-26.6
N575 X-3.7 Y-25.8
N580 X-3.0 Y-25.2
N585 X-2.2 Y-24.7
N590 X-1.4 Y-24.4
N595 X-0.5 Y-24.2
N600 X0.5
N605 X1.4 Y-24.4
N610 X2.2 Y-24.7
N615 X3.0 Y-25.2
N620 X3.7 Y-25.8
N625 X4.3 Y-26.6
N630 X4.4 Y-26.9
N635 X5.2 Y-28.2
N640 X6.3 Y-29.7
N645 X7.5 Y-31.2
N650 X8.8 Y-32.4
N655 X10.4 Y-33.6
N660 X12.0 Y-34.7
N665 X13.8 Y-35.6
N670 X15.6 Y-36.3
N675 X17.6 Y-36.9
N680 X19.5 Y-37.2
N685 X21.6 Y-37.4
N690 X23.6 Y-37.3
N695 X25.5 Y-37.1
N700 X27.4 Y-36.6
N705 X29.2 Y-36.0
N710 X30.8 Y-35.3
N715 X32.4 Y-34.5
N720 X33.7 Y-33.6
N725 X35.1 Y-32.5
N730 X36.4 Y-31.2
N735 X37.6 Y-29.9
N740 X38.7 Y-28.3
N745 X39.7 Y-26.7
N750 X40.5 Y-25.0
N755 X41.2 Y-23.0
N760 X41.7 Y-21.1
N765 X41.9 Y-19.1
N770 X42.0 Y-17.1
N775 X41.9 Y-15.1
N780 X41.6 Y-13.3
N785 X41.0 Y-11.2
N790 X40.4 Y-9.5
N795 X39.5 Y-7.7
N800 X38.6 Y-6.2
N805 X37.5 Y-4.8
N810 X36.5 Y-3.6
N815 X36.3 Y-3.4
N820 X36.2 Y-3.2
N825 X0 Y34.2
N830 X-14 Y19.8
N835 Z10
N840 G0 Z20
N845 X0 Y0
N850  M30

hao hao  好啊

D DDDDDDDDD

原帖由 jiugaosie 于 2006-8-6 22:03 发表

我查不到G80 G40 G94是什么意思
高手帮忙看下吧，解释下
感谢中

G80应该是取消固定循环，如G81、G82、G83等；G40是取消刀具左（右）补偿；G94应该是设定每分钟进给