【求助】AutoCAD2000 中是否可以在打印时,将所有图形的线宽加宽.

各位高手,CAD图中有很多线的线宽没有按by layer设置指了线宽,在老式的EPSON 1520k 上打印比例都协调的换到 HP的绘图仪上就嫌太细,若全部全部线宽都设成By layer.粗线条和细线条就乱掉了.
  能有办法吗?:I

用过滤器根据颜色，图层等进行筛选，
然后通过对象属性对话框进行修改。
autocad中图形对象最好依据图层进行管理，
否则，比较麻烦。

Don't set lineweight when setting layer, use the method I suppose
and then print it, may be you will know what I mean.

Joseph Lin wrote:
Procedure to change line weight of individual object  
    1. Command : LW, then choose [display lineweight]  
    2. Turn on [LWT] botton which located on the status row (bottom of    the screen)  
    3. Select objects (line , polyline or spline ... etc.) which you prefer to change lineweight  
    4. It is suitable to use in drawing outter or inner  circle of 2D screw   
    5. Pull down the [lineweight list] , and choose the proper lineweight  
         ps :  a. [Lineweight pull down list] is located at the right side next to [Linetype pull down list] of STANDARD TOOLBAR  
                 b. lineweight also work on .SHX text  
                 c. Before changing Dimsion text , you must explode the dimensin first to separate text from dimension line

  
你这主要是为了DISPLAY  打印的话层已经包含了这一步

Procedure to change line weight of individual object
  1. Command : LW, then choose [display lineweight]
  2. Turn on [LWT] botton which located on the status row (bottom of    the screen)
  3. Select objects (line , polyline or spline ... etc.) which you prefer to change lineweight
  4. It is suitable to use in drawing outter or inner  circle of 2D screw  
  5. Pull down the [lineweight list] , and choose the proper lineweight
       ps :  a. [Lineweight pull down list] is located at the right side next to [Linetype pull down list] of STANDARD TOOLBAR
               b. lineweight also work on .SHX text
               c. Before changing Dimsion text , you must explode the dimensin first to separate text from dimension line

Jacky Wang wrote:
為什么不在水管層一類中設置不同的几個層，如：水管其它線型或水管層中的其它顏色層，這樣就可以設置在不同的層中設置線寬。

::y::y::y

图层是基础

Jacky Wang wrote:
為什么不在水管層一類中設置不同的几個層，如：水管其它線型或水管層中的其它顏色層，這樣就可以設置在不同的層中設置線寬。

  
个人对软件的设定是一种习惯， 我是两部份都控制

為什么不在水管層一類中設置不同的几個層，如：水管其它線型或水管層中的其它顏色層，這樣就可以設置在不同的層中設置線寬。

我所问的情况有些特殊,例如在模具设计时,水管都是放在一个水管层,不管是虚线还是可见的实线都是同一种颜色,然后改变线型和线宽.有时为了表现的更直观些同一个层的颜色可能都不一样.水管可能更有普遍的意义.
   这种情况给颜色设置宽度也会有问题.(不该变粗线的变成了粗线....)