ug17,18的gpm.exe 有问题，大家要小心！

ug17,18的gpm.exe 有问题，大家要小心！

TOOL PATH/PLANAR_MILL,TOOL,MILL
TLDATA/MILL,30.0000,0.0000,75.0000,0.0000,0.0000
MSYS/-44.7115,-5.6939,0.0000,1.0000000,0.0000000,0.0000000,0.0000000,1.0000000,0.0000000
PAINT/PATH
PAINT/SPEED,10
SPINDL/RPM,2000,CLW
PAINT/COLOR,186
RAPID
GOTO/0.0000,0.0000,20.0000,0.0000000,0.0000000,1.0000000
RAPID
GOTO/0.0000,0.0000,2.5400
PAINT/COLOR,42
FEDRAT/MMPM,200.0000
GOTO/0.0000,0.0000,0.0000
PAINT/COLOR,31
FEDRAT/1000.0000
GOTO/0.0000,54.2741,0.0000
GOTO/103.1208,54.2741,0.0000
GOTO/103.1208,0.0000,0.0000
GOTO/0.0000,0.0000,0.0000
PAINT/COLOR,37
FEDRAT/500.0000
GOTO/0.0000,0.0000,2.5400
PAINT/COLOR,211
RAPID
GOTO/0.0000,0.0000,20.0000
rewind
PAINT/SPEED,10
PAINT/TOOL,NOMORE
END-OF-PATH
  
用16版的gpm.exe后处理上述cls文件如下
G21
G90S2000M03
G00Z20.
X0.Y0.
Z2.54
G01Z0.F200.
Y54.274F1000.
X103.121
Y0.
X0.
Z2.54F500.
G00Z20.
M30
  
用17，18用16版的gpm.exe后处理上述cls文件如下
G21
G90S2000M03
G00Z20.
Z2.54
G01Z0.F200.
Y54.274F1000.
X103.121
Y0.
X0.
Z2.54F500.
G00Z20.
M30
  
开头少了，x0.y0.
你们试试是不是这样！

什么问题？