iCAx开思网

标题: 【贴图】有请fzci老兄 [打印本页]

作者: waing3532 时间: 2004-10-20 14:51
标题: 【贴图】有请fzci老兄
我在这里下了你的UGPOST怎么跟你的帖图不一样呢?别的都很好,就是没有M08,换刀前也没有M09.怎么加上去?你能不能再传一次?不甚感激.同时要有人能把此类NC格式的PUI文件传上来就更好了.

作者: waing3532 时间: 2004-10-20 15:00
图没贴上去?如下:
============================================================
%(Wisdom Tech. By cam. Date: Wed Oct 20 15:06:11 2004)
O0100
G17G40G49G80
(CAVITY_MILL)
(*** Start path: CAVITY_MILL with tool: EM30R2 ***)
G91G28Z0.
T05M06
(Tool_Name=EM30R2 RPM=1234)
(TD=30.00 CR=2.00 FL=50.00)
G90G54G00X0.Y0.
G00X17.198Y15.232
S1234M03
G43H05Z3.M09
G17G01X15.904Y16.728Z2.47F753.
G43后应是M08才对呀.

作者: waing3532 时间: 2004-10-20 15:06
换刀处的程序,换刀前无M09后无M08
X-9.5
G03X-15.245Y82.001I0.J-7.
(*** End Of Path CAVITY_MILL ***)
(*** Start path: CAVITY_MILL_COPY with tool: MILL ***)
M05
G91G28Z0.
T12M06
(Tool_Name=MILL RPM=3000)
(TD=6.00 CR=0.00 FL=50.00)
G90G54G00X0.Y0.
G00X-88.757Y94.002
G43H34Z3.
Z-3.

作者: waing3532 时间: 2004-10-20 15:12
人为在机床控制里加了开水动作后,G43后变成了M08.
%(Wisdom Tech. By cam. Date: Wed Oct 20 15:16:35 2004)
O0100
G17G40G49G80
(CAVITY_MILL)
(*** Start path: CAVITY_MILL with tool: EM30R2 ***)
G91G28Z0.
T05M06
(Tool_Name=EM30R2 RPM=1234)
(TD=30.00 CR=2.00 FL=50.00)
G90G54G00X0.Y0.
G00X17.198Y15.232
S1234M03
G43H05Z3.M08

作者: fzci 时间: 2004-10-21 13:04

同一程式里如果有换第二把刀的时候...........会自动关切削液的.............换好刀自己再开.........

欢迎光临 iCAx开思网 (https://www.icax.org/)