问一个关于2000I的问题，大哥帮个忙

在2000I中标有AB的菜单里我只有DEFAULT视图，而我想看“前视，侧，后...................."等视图，怎么做？

老兄﹐有時間練一下五筆﹗

:
     &nbsplease don't scold that I am chinese but speak in English. I write in English just for that I input chinese very slow in computer and no efficient!
      Alan27 help me to translate it to chinese for me.he is right and very great !
      I now feel very glade because that I have get a fist score,thanks!
      here is a question to offerd  for solution . I believe that question is very importent to anyone those aren't very very fimiliar with proe. that is:
      how to introduce dwg file from autocad to proe part  modle directly    directly. and after doing that.you proe data must meet the following conditions:
       one :
              you only can use proe and autocad .
       tow:
             any entities must keep the origional type data format.
             eg:   a circle in autocad must is also a circle in  proe part  modle.
                     and can creat a diameter with a normal method in proe   
                     drawing.
        three:
              after being transformed proe part modle , every type view  
               drawing should in its real position .
              eg(third projection): the left veiw must lie in the left side of the main view and must be perpendicular to the main view(three-dimensional form) .the right view must lie in the right side of the main view and must be perpendicular to the main view (three-dimensional form). and so on.
        thanks! for I print chinese very slow I use english again !
        I BEG YOUR PARDENS!
        

完*美*者 ！
你翻译的很完美！，决没拍马屁！，谢谢！

谢谢各位大哥的教导！

jxwcb wrote:
)))
FIRST:
      Create a modle file (eg .part , .asembly,.drw). then make you favorite view orientions and save
SECOND:
       Save the builded modle file a template type file . eg  jxwcb.tmp
THIRD:
       Perform conflgure file option ,do according to the following action:
       template_solidpart:jxwcb.tmp
  PLEASE GAVE ME SCORES .THANKS!
   

我來做一次翻譯吧!
第一.
    建立一個模型文件(PART,ASSEMBLY,DRAWING等),然後建立你自己喜歡的視角,并保存!
第二.
    保存你建立好的模型文件為模板文件,JXWCB.TMP.
第三.
    執行CONFIG編輯器,加入如下選項:
    template_solidpart:jxwcb.tmp
    (并保存哦!)
    請給我分吧!謝謝!
(不知用TMP做模板文件行不行我就不知道了!)

jxwcb wrote:
)))
FIRST:
      Create a modle file (eg .part , .asembly,.drw). then make you favorite view orientions and save
  
SECOND:
       Save the builded modle file a template type file . eg  jxwcb.tmp
  
THIRD:
       Perform conflgure file option ,do according to the following action:
       template_solidpart:jxwcb.tmp
  PLEASE GAVE ME SCORES .THANKS!
  

  
OK!
If anyone knows what you said, or if you translate this to chinese ,  
I can give you scores .  
.

)))
FIRST:
     Create a modle file (eg .part , .asembly,.drw). then make you favorite view orientions and save
  
SECOND:
      Save the builded modle file a template type file . eg  jxwcb.tmp
  
THIRD:
     &nbsperform conflgure file option ,do according to the following action:
      template_solidpart:jxwcb.tmp
  PLEASE GAVE ME SCORES .THANKS!
  

需要保存视角!

给你发了个录像文件，看看是不是这样。