iCAx开思网

标题: UG编程问题 [打印本页]

作者: lanshao 时间: 2005-5-28 20:35
标题: UG编程问题
我用UG编的程序,最后输出怎么会是这样:

PAINT/PATH
PAINT/SPEED,10
LOAD/TOOL,1
PAINT/COLOR,186
RAPID
GOTO/1.9618,77.2617,50.1000,0.0000000,0.0000000,1.0000000
PAINT/COLOR,211
RAPID
GOTO/1.9618,77.2617,31.1000
PAINT/COLOR,42
FEDRAT/IPM,10.0000

请问在哪里能设置.

谢谢各位了!

欢迎光临 iCAx开思网 (https://www.icax.org/)