iCAx开思网

标题: 顶针避空问题 [打印本页]

作者: qq519881120 时间: 2011-7-18 17:14
标题: 顶针避空问题
请问顶针面板和b板单边逼空多小，0.25？0.5？

作者: cnetfan 时间: 2011-7-18 19:14
0.5MM/S, but you'd better follow your company's tooling design guideline.

作者: qq519881120 时间: 2011-7-19 10:51

cnetfan 发表于 2011-7-18 19:14
0.5MM/S, but you'd better follow your company's tooling design guideline.

谢了。。。。。。。。

欢迎光临 iCAx开思网 (https://www.icax.org/)