标题: 求解：在adams/view中建的轮胎模型的警告提示 [打印本页] 作者: tiangh33 时间: 2006-1-12 22:51 标题: 求解：在adams/view中建的轮胎模型的警告提示 各位大侠，我在adams/view中建立了一个轮胎道路模型（UA）在运行时总是出现这种警告，请指教这是怎么回事，给个解决的提示。 我是菜鸟
谢谢！
WARNING: For TIRE zhengche.TIRE_4 the absolute value of the longitudinal slip ratio
has gone beyond its maximum allowable limit of 1.0.
Longitudinal slip ratio = 2.1027.
If the longitudinal slip ratio is positive, it will be set
to 1.0 (braking). If the longitudinal slip ratio is
negative, it will be set to -1.0 (traction).
WARNING: An anomalous situation has been detected for TIRE zhengche.TIRE_1.
The moment arm for normal force (Fz) that causes the
rolling resistance moment (Ty) is greater than the allowable
maximum of 1/2 the length of the contact patch.
CRR = 6.250
CRR_max = 1.23886E-05
WARNING: Note regarding TIRE zhengche.TIRE_2.
Its Road Data File (E:/work/adams documents/zhengchemoxing/275r22.5_flat.rdf) is the same as the one for TIRE zhengche.TIRE_1,
and you have the RGRA argument on both TIRE statements.
ADAMS/Solver will generate redundant road graphics which
may slow graphics and animation in particular.
Include the RGRA argument on only one of these TIRE statements.作者: lws303 时间: 2006-1-13 13:56
把仿真精度调低试试!
各位大侠，我在adams/view中建立了一个轮胎道路模型（UA）在运行时总是出现这种警告，请指教这是怎么回事，给个解决的提示。
我是菜鸟