The greatest error in an equation is 1.93993E+07 in the
equation for FLEX_BODY model3.Flexible_Body_1 .
The greatest change in a variable is 4.4109 in the
variable for FLEX_BODY model3.Flexible_Body_1 .
Try the following in this order:
1. Use the MAXIT argument on the EQUILIBRIUM, IC, KINEMATICS,
or INTEGRATOR command to increase the maximum number of
iterations.
2. Temporarily change the value of the PATTERN argument on the
EQUILIBRIUM, IC, KINEMATICS, or INTEGRATOR command to
PATTERN = T.
3. Temporarily increase the value of the ERROR argument on the
EQUILIBRIUM, IC, KINEMATICS, or INTEGRATOR command at
time = 1.46681E-02 .
4. If one or more forces change rapidly or sharply near
time = 1.46681E-02, modify the force or forces.
到底该如何用什么样的哑元，并采用什么方式才能与弹性体相连
不才 请高手不吝赐教
