iCAx开思网

标题: [求助]关于模板的问题 [打印本页]

作者: opengl 时间: 2002-12-17 18:59
标题: [求助]关于模板的问题
进入加工模块时，选模板mill_contour-------mill_contour，这样就进去了，如果选
mill_contour-------mold_sequences，INITIALIZE时，就出现一些工序助理的对话框。
（如下图）

怎样才能让模板有这些工序助理呢？

作者: wukaijun2002 时间: 2002-12-18 12:57
写一个tcl文件!

作者: opengl 时间: 2002-12-29 13:55
算了，就直接拿mold_sequences来修改做模板，大家看看，我把它们集合在一起了。

作者: ycyddh 时间: 2002-12-29 14:09
怎么修改？

作者: opengl 时间: 2002-12-29 15:30
就是模板设置的问题了，之前有很多人问过，我就说一下，以我上面这个做例子。

1，打开\Unigraphics NX\MACH\resource\template_part\metric\mold_sequences.prt，
   进入加工模块。
2，把它原来的操作全部删除：

作者: opengl 时间: 2002-12-29 15:33
3，添加你需要的操作，并把其中的参数改为你所常用的。

作者: opengl 时间: 2002-12-29 15:37
4，SAVE，EXIT。
5，重新进入UG，进CAM模块时选你的模板：

作者: opengl 时间: 2002-12-29 15:41
6，OK。

   你就会发现其中的参数就是你刚才设定的，这样甚至你一个参数都不用设，就
   可以出程序了。

作者: opengl 时间: 2002-12-29 15:50
再跟刀具库合起来，就更完美了。

作者: ycyddh 时间: 2002-12-30 12:28
先谢了::b

收藏了::F::F

作者: zy123 时间: 2002-12-30 19:38
谢谢：）

作者: wfh_987 时间: 2003-8-6 15:59
多谢

作者: ninken 时间: 2003-8-6 21:57
一般都是这样做啦！这种做快又好又轻松。

作者: JINJUN 时间: 2003-8-9 08:46

opengl wrote:
进入加工模块时，选模板mill_contour-------mill_contour，这样就进去了，如果选
  mill_contour-------mold_sequences，INITIALIZE时，就出现一些工序助理的对话框。
  （如下图）
  
  怎样才能让模板有这些工序助理呢？

请教老大，这些工序有什么作用呢？

作者: 507 时间: 2003-10-9 20:48
::g::g::g::g::g::g::y
你真伟大
我要拜你为师
肯吗

作者: lanxin520 时间: 2003-11-7 10:40
谢谢！

作者: chenhi 时间: 2003-11-8 09:16
怎橛和刀具库和起来呀。

作者: opengl 时间: 2003-11-8 10:07
讲过了,自己找找.

作者: opengl 时间: 2003-11-8 10:11

JINJUN wrote:

  
请教老大，这些工序有什么作用呢？

例如里面其中一个,是指定安全平面的,设定后,做每个程序都不用再指定了.

作者: chenhi 时间: 2003-11-8 11:39
在哪儿呀，我找不到。那些安全平面，和避让。我都可以找到，可是和刀库连在一起我怎么也找不到。麻烦你了。

作者: vencent 时间: 2003-11-11 22:59
这也可以直接改UG加工模板的定义文件达到这种效果!
如:

#####################################################################
# template.dat
######################################################################
#
#
#
# library data file for classification of setup templates
###############################################################################
#
# -------------------------------------------------------------------
FORMAT  LIBRF TMPL_CLASS SETUP_TEMP TYPE_TEMP ATT1 ATT2
# -------------------------------------------------------------------
# LIBRF is a unique identifier
# TMPL_CLASS identifies the complete class hierarchy of the template
# SETUP_TEMP is the complete path for the setup template part file
# TYPE_TEMP is a list of type template associated with SETUP_TEMP
# ATT1 is the description of the template
# ATT2 is the attribute of the template
# -------------------------------------------------------------------
#
# Inch 001 - 100
DATA  | 001| general.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}turning.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}wire_edm.prt| General | Inch
DATA  | 002| general.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar_assy.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}turning.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}wire_edm.prt| General Assembly | Inch
DATA  | 003| legacy.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}cam_english_template.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}cam_english_template.prt | CAM English Legacy | Inch
DATA  | 004| mill.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt | Mill Planar | Inch
DATA  | 005| mill.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mold_sequences.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}die_sequences.prt | Mill Contour | Inch
DATA  | 006| mill.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_multi-axis.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt | Mill Multi Axis | Inch
DATA  | 007| mill.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mold_sequences.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mold_sequences.prt | Mold Sequences | Inch
DATA  | 008| mill.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}die_sequences.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}die_sequences.prt | Die Sequences | Inch
DATA  | 009| mill.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar_hsm.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar_hsm.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt | Mill Planar HSM | Inch
DATA  | 010| turn.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}turning.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}turning.prt | Turning | Inch
DATA  | 011| legacy.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}legacy_lathe.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}legacy_lathe.prt | Legacy Lathe | Inch
DATA  | 012| hole_making.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt | Hole Making | Inch
DATA  | 013| wedm.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}wire_edm.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}wire_edm.prt | Wire EDM | Inch
DATA  | 014| shops.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}shops_mill_planar.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}shops_mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}shops_drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}shops_control.prt | Shops Machinery | Inch
DATA  | 015| shops.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}shops_mill_contour.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}shops_mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}shops_mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}shops_drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}shops_control.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}shops_die_sequences.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}shops_mold_sequences.prt | Shops Die Mold | Inch
DATA  | 016| mill_turn.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}turning.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}turning.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt| Mill Turn | Inch
# Inch palette for NX2
DATA  | 001| inch.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}turning.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}wire_edm.prt| General | Inch
DATA  | 002| inch.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar_assy.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}turning.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}wire_edm.prt| General Assembly | Inch
# DATA  | 004| inch.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt | Mill Planar | Inch
DATA  | 005| inch.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mold_sequences.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}die_sequences.prt | Mill Contour | Inch
DATA  | 006| inch.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_multi-axis.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt | Mill Multi Axis | Inch
DATA  | 007| inch.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mold_sequences.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mold_sequences.prt | Mold Sequences | Inch
DATA  | 008| inch.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}die_sequences.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}die_sequences.prt | Die Sequences | Inch
DATA  | 010| inch.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}turning.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}turning.prt | Turning | Inch
DATA  | 012| inch.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}hole_making.prt | Hole Making | Inch
DATA  | 013| inch.| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}wire_edm.prt| ${UGII_CAM_TEMPLATE_PART_ENGLISH_DIR}wire_edm.prt | Wire EDM | Inch
#
#  Metric  101 - 200
DATA  | 101| general.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}turning.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}wire_edm.prt| General |  Metric
DATA  | 102| general.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar_assy.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}turning.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}wire_edm.prt| General Assembly |  Metric
DATA  | 103| legacy.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}cam_metric_template.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}cam_METRIC_template.prt | CAM  Metric Legacy |  Metric
DATA  | 104| mill.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt | Mill Planar |  Metric
DATA  | 105| mill.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mold_sequences.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}die_sequences.prt | Mill Contour |  Metric
DATA  | 106| mill.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_multi-axis.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt | Mill Multi Axis |  Metric
DATA  | 107| mill.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mold_sequences.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mold_sequences.prt | Mold Sequences |  Metric
DATA  | 108| mill.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}die_sequences.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}die_sequences.prt | Die Sequences |  Metric
DATA  | 109| mill.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar_hsm.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar_hsm.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt | Mill Planar HSM |  Metric
DATA  | 110| turn.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}turning.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}turning.prt | Turning |  Metric
DATA  | 111| legacy.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}legacy_lathe.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}legacy_lathe.prt | Legacy Lathe |  Metric
DATA  | 112| hole_making.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt | Hole Making |  Metric
DATA  | 113| wedm.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}wire_edm.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}wire_edm.prt | Wire EDM |  Metric
DATA  | 114| shops.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}shops_mill_planar.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}shops_mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}shops_drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}shops_control.prt | Shops Machinery |  Metric
DATA  | 115| shops.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}shops_mill_contour.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}shops_mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}shops_mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}shops_drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}shops_control.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}shops_die_sequences.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}shops_mold_sequences.prt | Shops Die Mold |  Metric
DATA  | 116| mill_turn.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}turning.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}turning.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt| Mill Turn | Metric
# Metric palette for NX2
DATA  | 101| metric.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}turning.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}wire_edm.prt| General |  Metric
DATA  | 102| metric.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar_assy.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}turning.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}wire_edm.prt| General Assembly |  Metric
# DATA  | 104| metric.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt | Mill Planar |  Metric
DATA  | 105| metric.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mold_sequences.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}die_sequences.prt | Mill Contour |  Metric
DATA  | 106| metric.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_multi-axis.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_multi-axis.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt | Mill Multi Axis |  Metric
DATA  | 107| metric.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mold_sequences.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mold_sequences.prt | Mold Sequences |  Metric
DATA  | 108| metric.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}die_sequences.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_contour.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}mill_planar.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}drill.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}die_sequences.prt | Die Sequences |  Metric
DATA  | 110| metric.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}turning.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}turning.prt | Turning |  Metric
DATA  | 112| metric.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}hole_making.prt | Hole Making |  Metric
DATA  | 113| metric.| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}wire_edm.prt| ${UGII_CAM_TEMPLATE_PART_METRIC_DIR}wire_edm.prt | Wire EDM |  Metric
#
#  User Additions
#
# Setup templates added by users should only use librefs greater than 200
#

作者: JONA 时间: 2003-11-12 12:55
li hai!

作者: szcad@163.com 时间: 2003-11-12 19:43
哈哈，第一种方法常用，我一直是这样做的，第二种到是第一次看到，

作者: liuanping 时间: 2003-11-18 08:22

chenhi wrote:
在哪儿呀，我找不到。那些安全平面，和避让。我都可以找到，可是和刀库连在一起我怎么也找不到。麻烦你了。

和第三步相似
只要建立刀具就可以了
以后的接着做

作者: huangwei-ljl 时间: 2005-12-4 13:58
刀库的多是英文啊　　我搞不定啊

作者: 拓进 时间: 2006-2-23 20:55
长见识了

作者: ykq1120 时间: 2006-2-24 11:46
谢谢~~又学到一招了

作者: JSQJOB 时间: 2006-2-26 22:49
大哥,怎样跟刀库捆绑,请赐教

作者: sz_qch 时间: 2006-3-2 12:47
顶一下

作者: sz_qch 时间: 2006-3-2 12:53
顶一下

作者: haitao136 时间: 2006-4-2 00:17
谢谢~~又学到一招了

作者: 武松打呼噜 时间: 2006-4-5 15:41
不懂

作者: qingliuyi 时间: 2006-4-22 13:13
是不错！

作者: laji57551 时间: 2006-9-14 00:41
顶吧

作者: CNC同盟党3号 时间: 2006-9-19 21:51
我怎么不能保存

作者: CNC同盟党3号 时间: 2006-9-19 21:59
搞定　你太帅了

欢迎光临 iCAx开思网 (https://www.icax.org/)