iCAx开思网

标题: CLS 刀位文件如何在vericut 中模拟? [打印本页]

作者: zhiwen79 时间: 2007-1-13 18:42
标题: CLS 刀位文件如何在vericut 中模拟?
叶轮毛坯大小如何确定? 多谢!!

TOOL PATH/SWARF,TOOL,MILL
TLDATA/MILL,12.7,6.5,80.0000,0.0000,0.0000
MSYS/0.0000,0.0000,-22.2250,1.0000000,0.0000000,0.0000000,0.0000000,1.0000000,0.0000000
$$ centerline data
PAINT/PATH
PAINT/SPEED,10
PAINT/COLOR,4
RAPID
GOTO/141.5390,-149.2785,122.4956,-0.0872421,-0.0841655,0.9926253
PAINT/COLOR,6
FEDRAT/MMPM,254.0000
GOTO/150.4028,-140.7272,21.6449
PAINT/COLOR,3
GOTO/148.9899,-140.6661,22.0181,-0.0729571,-0.0852113,0.9936882
GOTO/147.5945,-140.5959,22.2130,-0.0584678,-0.0860746,0.9945716
GOTO/146.8990,-140.5576,22.2511,-0.0511621,-0.0864405,0.9949424
GOTO/146.5514,-140.5376,22.2559,-0.0475012,-0.0866085,0.9951093
GOTO/146.2037,-140.5172,22.2550,-0.0438381,-0.0867672,0.9952636

作者: ksddhjlug 时间: 2007-1-27 22:03
叶轮毛坯大小就选择轮盖曲线，生成一个。
你会设计叶轮吧？叶片型线是怎么回事啊？

作者: nizhen6007 时间: 2008-12-16 21:57
我只听说过NC文件模拟，什么时候刀位文件也可以模拟了？（vericut）

作者: 761bfe 时间: 2009-5-10 23:32
支持！学学VERICUT 支持！学学VERICUT

作者: qingwawanz 时间: 2016-6-5 16:11
相互学习，共同进步

欢迎光临 iCAx开思网 (https://www.icax.org/)