iCAx开思网

标题: Fanuc立臥四軸後處理 [打印本页]

作者: yit02yit02 时间: 2012-1-20 08:29
标题: Fanuc立臥四軸後處理
本帖最后由 yit02yit02 于 2012-1-20 08:31 编辑

G54.2 座標偏移
使用MPMaster後處理修改而成

[attach]1115731[/attach]

[attach]1115732[/attach]

%
O0000
/#601=0(X)
/#602=0(Y)
/#603=0(Z)
/#604=0(B)
/G10L21P1X#601Y#602Z#603B#604
(PROGRAM-10220-02-BF-2)
(DATE-2012/01/20 TIME-08:21Amos)
(T117 - D16-F-105L - H117 - D117 - D16.000mm)
G00 G17 G21 G40 G80 G90
G91 G30 Z0.
T117 (D16-F-105L)
M06
(MAX - Z166.561)
(MIN - Z-27.439)
N1 (D16-F-105L)
G54.2 P1
M11 (UNLOCK)
G00 G17 G90 G55 B343. X-207.164 Y81.077
M10 (LOCK)
G43 H117 Z166.561
S550 M03
Z68.561
G94 G01 Z56.561 F300.
G41 D117 X-209.488 Y85.276
G03 X-213.837 Y86.527 I-2.8 J-1.549

该贴已经同步到 yit02yit02的微博

欢迎光临 iCAx开思网 (https://www.icax.org/)