标题: MY MPA ANSYS2 [打印本页] 作者: zjxwhu 时间: 2003-8-21 10:52 标题: MY MPA ANSYS2 Release Level: 6.0
SD097-huer_adv
Part Name: SD097-huer
Material Supplier: Eastman Chemical Products
Material Grade: Eastar PETG 6763
Max Injection Pressure: 140.00 MPa
Mold Temperature: 30.00 deg.C
Melt Temperature: 265.00 deg.C
Model Suitability: Part model was highly suitable for analysis.
SD097-huer_adv
Moldability: Your part may be difficult to fill and part quality may be unacceptable.
View the Confidence of Fill plot and use the Dynamic Adviser to get help on how to improve the filling of the part.
Confidence: Medium
Injection Time: 1.27 sec
Injection Pressure: 124.72 MPa
Weld Lines: Yes
Air Traps: Yes
Shot Volume (cavity, runner): 226.65 cu.cm ( 155.57, 71.09 )
Filling Clamp Force: 269.33 tonne
Packing Clamp Force Estimate @20%: ( 24.94 )MPa 198.91 tonne
Packing Clamp Force Estimate @80%: ( 99.78 )MPa 795.62 tonne
Packing Clamp Force Estimate @120%: ( 149.67 )MPa 1193.43 tonne
Clamp Force Area: 781.95 sq.cm
Cycle Time: 17.38 sec
Warnings: