iCAx开思网

标题: Siemens PLM同步建模技术开始逐步支持自由曲面 [打印本页]

作者: chinalgw 时间: 2010-10-13 17:21
标题: Siemens PLM同步建模技术开始逐步支持自由曲面
https://www.tenlinks.com/news/PR/siemens_plm/101210_freeform_design_nx.htm

Siemens PLM Launches NX with Synchronous-enabled Freeform

MOSCOW, Oct 12, 2010 - NX product design software, from Siemens PLM Software, now supports synchronous-enabled freeform design. With these new, unique tools, users can create and modify complex freeform geometry with exceptional speed, versatility, and control. With this capability, NX delivers an advanced shaping toolkit that works with any geometry – even imported models.

Simple push and pull shaping techniques mean users don’t have to be a surface design expert to create complex freeform models. The freeform modeling tools allow users to begin with solid or surface, analytic or B-rep geometry. You can insert or model organic forms by moving constraint points, surface poles and handles. Surface selection and analysis tools help users control continuity, blending and inflections to create designs with greater aesthetic appeal. These freeform models are completely re-usable, from concept through production.

For more information visit: https://www.plm.automation.siemens.com/en_us/products/nx/nx7/CAD/accelerate_design.shtml

About Siemens PLM Software
Siemens PLM Software, a business unit of the Siemens Industry Automation Division, is a leading global provider of product lifecycle management (PLM) software and services with nearly 6.7 million licensed seats and 63,000 customers worldwide. Headquartered in Plano, Texas, Siemens PLM Software works collaboratively with companies to deliver open solutions that help them turn more ideas into successful products.

作者: liujunyun 时间: 2010-10-13 17:35
看过这个自由曲面的视频，但找不到命令在哪

作者: liujunyun 时间: 2010-10-13 17:40
是不是以后针对曲面的同步建模会有比较大的突破呢

作者: 大有茗堂 时间: 2010-10-13 17:44
哈哈。越来越体现出同步技术的强悍。

作者: jingweif 时间: 2010-10-13 17:45
相当不错，越来越方便啦

作者: chinalgw 时间: 2010-10-13 17:53

liujunyun 发表于 2010-10-13 17:35
看过这个自由曲面的视频，但找不到命令在哪

MOSCOW, Oct 12, 2010

刚发布的新闻，我觉得最新的NX752可能支持。具体的要等到752下来吧，我也只看到了新闻。

自由曲面的支持是一件很复杂的事情，肯定会一点一点增强的。

作者: congriy3721 时间: 2010-10-13 21:08
有点类似于x-成型
其实X-成型有同步建模的雏形

作者: kuanghaitao 时间: 2010-10-14 07:27
这个要支持。

作者: zhangguangyang 时间: 2010-10-14 07:54
学习，顶顶！！！

作者: 396164430 时间: 2010-10-16 15:06
。越来越体现出同步技术的强悍。

欢迎光临 iCAx开思网 (https://www.icax.org/)