| 行程 | S.A.E. | 公制 | |
| Maximum X Axis | 40 | " | 1016 mm |
| Maximum Y Axis | 26 | " | 660 mm |
| Maximum Z Axis | 25 | " | 635 mm |
| Spindle nose to table (min) | 4 | " | 102 mm |
| Spindle nose to table (max) | 29 | " | 737 mm |
| 标准工作台 | S.A.E. | 公制 | |
| Length | 54 | " | 1372 mm |
| Width | 25 | " | 635 mm |
| Max Weight on Table | 1750 | lb | 794 kg |
| T-slot Width | 0.625 | " | 15.875 mm |
| T-slot Center Distance | 3.15 | " | 80 mm |
| Number of T slots | 5 | 5 |
| 主轴 | S.A.E. | 公制 | |
| Taper Size | #40 Taper | #40 Taper | |
| Spindle Max Speed | 12000 | rpm | 12000 rpm |
| Drive System | Inline Direct Drive | Inline Direct Drive | |
| Max Torque Standard | 75 | ft-lb | 102 Nm |
| with Optional Gearbox | |||
| Spindle Motor Max. Rating | 30 | hp | 22.4 kw |
| Bearing Lubrication | Air/Oil Injection | Air/Oil Injection | |
| Cooling | Liquid Cooled | Liquid Cooled |
| A轴电机 | S.A.E. | 公制 | |
| Max Thrust Rating X | 3085 | lb | 13723 N |
| Max Thrust Rating Y | 3085 | lb | 13723 N |
| Max Thrust Rating Z | 3923 | lb | 17450 N |
| Rapids on X Axis | 1400 | in/min | 35.6 m/min |
| Rapids on Y Axis | 1400 | in/min | 35.6 m/min |
| Rapids on Z Axis | 1400 | in/min | 35.6 m/min |
| Max Cutting | 833 | in/min | 21.2 m/min |
| 进给倍率 | S.A.E. | 公制 | |
| Rapids on X Axis | 1400 | in/min | 35.6 m/min |
| Rapids on Y Axis | 1400 | in/min | 35.6 m/min |
| Rapids on Z Axis | 1400 | in/min | 35.6 m/min |
| Max Cutting | 833 | in/min | 21.2 m/min |
| toolchanger | S.A.E. | 公制 | |
| Capacity Standard | 24+1 | 24+1 | |
| Tool Type / Taper | CT 40 | CT 40 | |
| Max Tool Diameter Std (full) | 3.0 | " | 76 mm |
| Maximum Tool Weight | 12 | lb | 5.4 kg |
| Changer Type Standard (Optional) | SMTC | SMTC | |
| Tool-to-Tool (avg) | 1.6 | sec | 1.6 sec |
| Chip-to-Chip (avg) | 2.2 | sec | 2.2 sec |
| 概要 | S.A.E. | 公制 | |
| Max Operating Height | 117.5 | " | 2984 mm |
| Door Opening Width | 48.5 | " | 1232 mm |
| Machine Weight | 14,000 | lb | 6350 kg |
| Max Operating Width | 138.86 | " | 3527 mm |
| Max Operating Depth | 110 | " | 2794 mm |
| Air Required | 4 | CFM | 113 lpm |
| Power Required | 28 kVA; <br>200-250 VAC @ 100A, 3-phase;<br>50-60 Hz | 28 kVA; <br>200-250 VAC @ 100A, 3-phase;<br>50-60 Hz |
| 欢迎光临 iCAx开思网 (https://www.icax.org/) | Powered by Discuz! X3.3 |