iCAx开思网

标题: 【注意】用9.1新POST的朋友＜V9.1 Post Processor Information＞ [打印本页]

作者: lucnjp 时间: 2003-5-5 21:58
标题: 【注意】用9.1新POST的朋友＜V9.1 Post Processor Information＞
:8)

*IMPORTANT* - Version 9.1 update from the CNC Software Post Department

  We have encountered an issue in Mastercam v9.1 that affects Post Processing.

  Check the setting of the ARCCHECK post flag in ALL post processors to be used with v9.1

  This affects Mill, Router, Lathe, and Wire products.

  Load your post processor (.PST) file into a text editor.
  In Mastercam, select Files, Edit, PST and select the PST file.

  Search for this line >> arccheck  : 1 #Check for small arcs, convert to linear

  If ARCCHECK exists in the PST file >>

  *** Make SURE that the value setting for ARCCHECK is 1  ***

  Note that this includes these Mill post processors on the v9.1 CD !

  MPFAN.PST

  MPHAAS.PST

  MPAKIRA.PST

  MPAN5300.PST

  MPBOSS5.PST

  ------------------------------------------------------------

Post Processing Services

CNC Software Inc.

posts@mastercam.com

作者: boy9981 时间: 2003-5-6 10:26
谢谢！

作者: tyxt3758 时间: 2010-3-11 11:54
没看懂什么意思！！！

欢迎光临 iCAx开思网 (https://www.icax.org/)