标题: CAE 项目 [打印本页] 作者: lesun_hou 时间: 2006-9-8 17:17 标题: CAE 项目 We are developing a plastic bucket with a sealing screwtop lid. The
bucket may be shipped by air, so needs to withstand a 6.4 PSI internal
pressure above ambient. We had previously designed a thicker version
with ribs, but the pressure requirement was removed by the client.
Now it is back and we are looking at adding radial ribs to the lid to
minimize deflection. Would it be possible for your team to run Finite
Element Analysis on the before and after lid designs to evaluate
increased stiffness? We could correlate your results on the before
version with our actual testing to increase confidence in the results.
We could provide the CAD models in Pro/E, IGES or STEP formats.
If somebody is interested in this project, please let me know, I will send a test report
for you review. then please give us your estimated price and schedule.作者: bluegangster 时间: 2006-9-12 19:25
发给我，我帮你做 forengineer@126.com作者: xjw0110xxxxxx 时间: 2006-9-15 21:41
发过来,我看看! xjw0110@sina.com作者: pdman45 时间: 2006-9-19 14:38
Hello, I did several project using Patran/Nastran, had 5 years FEM experience. Pls. send me a report and your requirement if you are stilll looking for ....
micropower2000@163.com作者: lesun_hou 时间: 2006-9-22 17:04
check your email作者: yuanzhuowei 时间: 2007-3-29 16:59
If you haven't solve this problem, sent me the model file, after reading your description, I think I could help you as soon as possible,
My email: zhuoweiyuan@yahoo.com.cn