标题: 海德汉镗孔后处理探讨 [打印本页] 作者: oushiyun 时间: 2006-4-7 21:17 标题: 海德汉镗孔后处理探讨 pbore2 # Canned Bore #2 Cycle
setup=setup*m_one
pdrill_calc
n, sdef, sboring2
n, sdef, "1.1", ssetup, setup
n, sdef, "1.2", sdepth, depth
n, sdef, "1.3", sdwell, dwell
n, sdef, "1.4", sshift, shift
n, sdef, "1.5", strf, *fr
n, strl, x, y, strr0, pfr, "M03"
n, strl, *refht, strr0, pfr, strm
n, scall, strm
n, strl, "Z", depth , strr0, " M05 ", strm
n, strl, *refht , strr0, " M03 ", strm
# n, strl, *refht, strr, "F2500", smcool
# n, strl, *z, strr, "F2500", sm99
0 BEGIN PGM 1 MM
1 TOOL DEF 1 L+0. R+2.
2 TOOL CALL 1 Z S800
3 CYCL DEF 1.0 BORING2
4 CYCL DEF 1.1 SET UP -5.
5 CYCL DEF 1.2 DEPTH -10.
6 CYCL DEF 1.3 DWELL 1.
7 CYCL DEF 1.4 SHIFT 0.
8 CYCL DEF 1.5 F1000
9 L X-15 Y+10 R0 F1000 M03
10 L Z+5 R0 F1000 M
11 CYCL CALL M 机床走到这一步就停了，应该是DEF有问题
12 L Z-10. R0 M05 M
13 L Z+5 R0 M03 M
14 L X+15 R0 F1000 M99 M
15 L Z-10. R0 M05 M
16 L Z+5 R0 M03 M
17 L X+0 Y-10 R0 F1000 M99 M
18 L Z-10. R0 M05 M
19 L Z+5 R0 M03 M
20 STOP M25
21 END PGM 1 MM
0 BEGIN PGM 1 MM
1 TOOL DEF 1 L+0. R+2.
2 TOOL CALL 1 Z S800
3 L X-15 Y+10 R0 F1000 M03
4 L Z+5 R0 F1000 M
5 L Z-15 R0 F1000 M
11 STOP M25 这里已经使下面的程式失效
14 L X+15 R0 F1000 M03
4 L Z+5 R0 F1000 M
5 L Z-15 R0 F1000 M
11 STOP M25
17 L X+0 Y-10 R0 F1000 M03
4 L Z+5 R0 F1000 M
5 L Z-15 R0 F1000 M
20 STOP M25
21 END PGM 1 MM
