iCAx开思网

标题: 在Proe里面直接打印工程图的问题 [打印本页]

作者: wzhyin 时间: 2005-10-13 16:43
标题: 在Proe里面直接打印工程图的问题
请教大侠们
在Proe里面直接打印工程图时要如何设置啊,
我打印出来的图不是不在中心就是偏边啊,还有里面的线条细宽该如何设置啊.

望能具体的说明下,或传一打印的table文件什么的.
谢谢先了.

作者: wzhyin 时间: 2005-10-13 17:42
急啊,

作者: wzhyin 时间: 2005-10-14 08:56
请教啊,不然的话,每次出图都要先转化为DWG格式,那也太麻烦了啊。

作者: ling8316 时间: 2005-10-15 10:13
线型大小如下:
ztable.pnt

! This is a pen table file. See Interface Guide under "pen mapping".

! Pen 1 = white entities (object lines)
! Pen 2 = yellow entities (text, dimensions, cross hatching)
! Pen 3 = gray entities (hidden lines)
! Pen 4 = red entities (can use for drawing border if you change the
! entity color to red in the format file)
! Pen 5 = green entities (sheetmetal)
! Pen 6 = cyan entities (section)
! Pen 7 = dark gray entities (dimmed)
! Pen 8 = blue entities (spline surface grid)

pen 1 thickness .018 cm; drawing_color
pen 2 thickness .01 cm; letter_color
pen 3 thickness .009 cm; half_tone_color
pen 4 thickness .005 cm; highlite_color
pen 5 thickness .005 cm; color 0 0 0
pen 6 thickness .005 cm; color 0 0 0
pen 7 thickness .02 cm; color 0 0 0
pen 8 thickness .02 cm; color 0 0 0

作者: ling8316 时间: 2005-10-15 10:18
标题: 线型大小这样设置

作者: ling8316 时间: 2005-10-15 10:21
标题: 线型大小这样设置
2005-10-15 10:13 [信息] [悄悄话] [编辑] [引用] [报告] [搜索] 第 4 楼

--------------------------------------------------------------------------------
线型大小如下:
table.pnt这样设置

! This is a pen table file. See Interface Guide under "pen mapping".

! Pen 1 = white entities (object lines)
! Pen 2 = yellow entities (text, dimensions, cross hatching)
! Pen 3 = gray entities (hidden lines)
! Pen 4 = red entities (can use for drawing border if you change the
! entity color to red in the format file)
! Pen 5 = green entities (sheetmetal)
! Pen 6 = cyan entities (section)
! Pen 7 = dark gray entities (dimmed)
! Pen 8 = blue entities (spline surface grid)

pen 1 thickness .018 cm; drawing_color
pen 2 thickness .01 cm; letter_color
pen 3 thickness .009 cm; half_tone_color
pen 4 thickness .005 cm; highlite_color
pen 5 thickness .005 cm; color 0 0 0
pen 6 thickness .005 cm; color 0 0 0
pen 7 thickness .02 cm; color 0 0 0
pen 8 thickness .02 cm; color 0 0 0

作者: ling8316 时间: 2005-10-15 10:28
标题: 然后
然后在config.pro加上

pen_table_file E:\LHH\TABLE.PIN

E:\LHH\表示路径，

上面pen 1 thickness .018 cm; drawing_color 中.018 cm表示线型大小单位cm,.

作者: ling8316 时间: 2005-10-15 10:33
我不会贴图，要不就详细点。如还不明白请：ling888168@163.com 也可以QQ：
453559657

作者: ling8316 时间: 2005-10-15 10:38
标题: TABLE下载

欢迎光临 iCAx开思网 (https://www.icax.org/)