iCAx开思网

标题: 各位大哥，能不给解释一下意思，如何解决，谢谢 [打印本页]

作者: xufeng1113 时间: 2005-6-20 17:40
标题: 各位大哥，能不给解释一下意思，如何解决，谢谢
** WARNING ** Strain model data build ID does not match with the current
              MPI version (default model for this material is CRIMS).

** ERROR 104007 ** Shrinkage model coefficients were generated with
                   build # 2435  of solver, the latest solver update
                   was in build # 3104 .
                  &nbsp

lease re-select the material to update the study file
                   with the latest shrinkage model coefficients.

** WARNING ** A program crash or network disruption has stopped
              a running flow analysis.
              The Analysis has been relaunched.
** WARNING ** A program crash or network disruption has stopped
              a running flow analysis.
              The Analysis has been relaunched.

作者: 闹钟生活 时间: 2005-6-20 17:58
** WARNING ** Strain model data build ID does not match with the current
            MPI version (default model for this material is CRIMS).

应力模型的数据ID号与所用的MPI版本不匹配（该材料的应力模型默认是CRIMS）

** ERROR 104007 ** Shrinkage model coefficients were generated with
                  build # 2435 of solver, the latest solver update
                  was in build # 3104 .
                  Please re-select the material to update the study file
                  with the latest shrinkage model coefficients.
**错误104007**收缩模型的生成时的求解版本是#2435，而最新的求解版本已更新为#3104。
            请重新选择该材料以更新方案文件中材料的收缩模型数据为最新版本。

** WARNING ** A program crash or network disruption has stopped
            a running flow analysis.
            The Analysis has been relaunched.
            运行流动分析时程序被终止
            分析已重新启动。

解决方式就是让你重新选择一下材料，更新方案中的材料数据。以前就回答过你了啊。还问！

作者: 闹钟生活 时间: 2005-6-20 17:59

作者: xufeng1113 时间: 2005-6-20 18:02
最后一个，我应怎么，解决它。请多多指教，谢谢

作者: xufeng1113 时间: 2005-6-20 18:04
我刚才没有看到，最后一段话，又问你了，谢谢，
但是我改过材料了还是不行呀

作者: xiaov 时间: 2005-6-21 22:01
材料参数里有一项算翘曲的模式改一下设置。

作者: z30th 时间: 2005-12-5 11:26
翘曲分析:Fiber Filled material+MPI/Fiber+Shrink data 用CRIMS(Conrrected Residual In-Mold Stress)修正后的残余应力模型
Fiber Filled material+MPI/Fiber用Uncorrected Residual Stress(未修正残余应力模型)
你看你选择的材料里有没有Shrink data,没有的话建议你把应力模型改为Uncorrected Residual Stress

作者: zhuzx 时间: 2005-12-5 17:58
据我所知不是这样的，你的分析模型是练习用的模型吧？要把网格删掉重新生产才可以！

欢迎光临 iCAx开思网 (https://www.icax.org/)