标题: 谁还没睡，我想和他讨论一下装配体的问题 [打印本页] 作者: 数码王 时间: 2005-5-20 23:56 标题: 谁还没睡，我想和他讨论一下装配体的问题
今天熬夜做个东西，不知道谁还没睡。想和他讨论一下关于添加配合关系的事作者: Enovia 时间: 2005-5-21 00:14
贴个图片上来啊作者: bopie 时间: 2005-5-21 00:26
兄弟，有没有solidworks个人版？我也没有睡！作者: 数码王 时间: 2005-5-21 00:33
我想让滑块在壳的槽里滑动
我先给它添加了一个背面的重合关系
想再给加个侧面的重合 不让我加了
我只好给边线 加了重合作者: 数码王 时间: 2005-5-21 01:22
--- 在 凸轮滑块式差速器总成 仿真 2005年5月21日 1:28:12，帧： 200， 时间： 1 ---
At time 0.000000000E+00 the integrator is unable to proceed. Possible Causes:
(1) The accuracy required for the numerical solution can not be attained.
Relax (increase) the value of the acceptable integration ERROR.
(2) Incompatible redundant constraints, a lock up, or a bifurcation
situation. The latter two indicate a mechanism design problem.
(3) The system includes a zero (or relatively small) mass on a part with
an unconstrained translational degree of freedom.
Make sure you have mass on all parts with translational degrees of freedom.
(4) The system includes a zero (or relatively small) inertia on a part
with an unconstrained rotational degree of freedom.
Make sure you have inertias on all parts with rotational degrees of freedom.
(5) An ADAMS element has a function expression that equals exactly itself.
For example,
SFORCE/id1,I=id2,J=id3,ROT,FUNC=SFORCE(id1,jflag,comp,rm),and
DIFF/id4,IMPLICIT,IC=0,FUNC=DIF1(id4).
Similarly,
VARIABLE/id5, FUNC=VARVAL(id5)*TIME
equals itself at 1 second. Avoid setting an ADAMS element equal to itself.
