iCAx开思网

标题: 【求助】关于ＭR0304 [打印本页]

作者: 牛皮 时间: 2004-11-13 10:48
标题: 【求助】关于ＭR0304
＂Mastercam 9.1 MR0304 pojie文件＂我下不下来，谁有传上来分享一下了！

谢谢！
＂MasterCam V9.0 Cad设计和Cam编程软件的汉化补丁＂是不是没用的？我也下不了呢！

作者: defa1 时间: 2004-11-13 11:35
ok

作者: 牛皮 时间: 2004-11-13 11:44

defa1 wrote:
ok

谢了，兄弟！
怎么称呼呢？

作者: 牛皮 时间: 2004-11-13 12:24
我Ｅ文不大ＯＫ，这一步怎么做？＂Execute nhasp9.exe utility, select NetHASP Network then press the Read button this gonna set up correct registry settings

＂

作者: defa1 时间: 2004-11-13 12:25
不用客气!叫我阿华就可以了

作者: 牛皮 时间: 2004-11-13 12:28
我按了＂Ｒｅａｄ＂后显示NetHASP not found on the network
各位大哥帮帮忙吧！

作者: defa1 时间: 2004-11-13 12:29

牛皮 wrote:
我Ｅ文不大ＯＫ，这一步怎么做？＂Execute nhasp9.exe utility, select NetHASP Network then press the Read button this gonna set up correct registry settings ＂

看

作者: luyaohua 时间: 2004-11-13 13:59
用之前要打开nhsrvw32.exe

作者: 牛皮 时间: 2004-11-13 15:10
我的怎么不行呢？

作者: 牛皮 时间: 2004-11-13 15:14
华哥：
Install mastercam 9.1, then goto "cdrom\Mr0304 Bug Patch"
  From this folder, install both Mill + Lathe patches
先安装 mastercam 9.1, 然后在"\ Mr0304 *** "
  文件夹里面, 安装Mill和Lathe的两个补丁

copy our special nethasp server (nhsrvw32.exe) somewhere on your
  hdd
  复制我们指定的nethasp 伺服程序到你的硬盘 (nhsrvw32.exe)

Copy every .acc files, the .dll in C:\Mcam9
  复制所有的＂*．acc＂文件到C:\ Mcam9

作者: 牛皮 时间: 2004-11-13 15:18
原文是这样的！求高手译下！
     Mastercam v9.1 MR304 + MuR0904 + FUTURE installation procedure
  Preliminary :          
  -------------      
  Because mastercam mess, please during installation, use C:\Mcam9\
  if you don't follow this, you will not be able to use our shortcut
  but it is still trivial, do modify them...      
    
  Why shortucts ??? cause some options can only be enabled like that

  Installation:               
  -------------                
  Install mastercam 9.1, then goto "cdrom\Mr0304 Bug Patch"    
  From this folder, install both Mill + Lathe patches     

  copy our special nethasp server (nhsrvw32.exe) somewhere on your
  hdd              
  Copy every .acc files, the .dll in C:\Mcam9      
  
  IMPORTANT STEP!!!            
  Execute nhasp9.exe utility, select NetHASP Network then press  
  the Read button this gonna set up correct registry settings

  
  tip: troubles? install hasp drivers from X:\Mcam9\COMMON\hdd32.exe
            
  Usage:                
  ------              
  Copy our premade shortcuts (.lnk) in your desktop or wherever you
  want them            
  execute nhsrvw32.exe to launch nethasp server in non service mode

  Double click any lnk to launch a mastercam module
            
  About maintenance date: Because mastercam does selling support
  per year, one cannot have 3 or 4 years of maintenance without to
  patch mastercam executables, it is limited to 400 days maximum!

  Each time you start the nethasp server, the server will retrieve
  current system date, add 399 days to it and use it as maintenance
  expiry... This means maintenance date will never be reached lol
  In case of problems with catia 4/5 converter:        
  ---------------------------------------------       
  On some machines appears a problem which prevent legitimate user
  to use converter because their mess      
  If you experience any troubles, please rename the following paths:
  "any how installer wrote it" to X:\Mcam9\COMMON\CAT4DATA\IOP4.DLL
  "any how installer wrote it to X:\Mcam9\APPS    
  Mebbie other paths to fix up, good luck, thanks CNC software for
  their assholism.           
  NOtes:              
  ------            
  we decided to not include service based nethasp server because
  this service based licensing would only be required in a real
  production environment, which is for sure something we totally
  disagree            

作者: lxing00000 时间: 2004-11-13 16:07
在第三行加入下面

C:\Mcam9\COMMON\hdd32.exe

作者: 牛皮 时间: 2004-11-13 17:06

lxing00000 wrote:
在第三行加入下面
  
C:\Mcam9\COMMON\hdd32.exe

还是不成呢？

作者: 牛皮 时间: 2004-11-13 17:18
7跟8没弄成功，可以打开了呢？
  1 需接受c:\mcam9 的默认安装目录
2 打开安装软件\Mr0304 Bug Patch 将压缩文件解压
3 安装mcam9 完成后用安装软件\Mr0304 Bug Patch 解压的文件PJ
4 copy 安装软件\Crack\Acc\*.* 到 c:\mcam9
5 copy 安装软件\Crack\lnk\*.* 到你的桌面 (用这些快捷方式做起动mcam)
6 copy 安装软件\Crack\NetHASP_Serve\*.* 到c:\mcam9
7 copy C:\Mcam9\Common\Cat4DATA\iop4.dll 到C:\Mcam9\Apps\
8 双击c:\mcam9\nhasp9.exe 点取 nethasp 和 network pddee code file 选C:\Mcam9\Common\hdd32.exe
  然后 read----ok
9 copy c:\mcam9\nhsrvw32.exe 到windows 的程序组的启动目录里
10 reset 电脑

作者: pou88 时间: 2008-3-19 22:03
谢了，兄弟！

欢迎光临 iCAx开思网 (https://www.icax.org/)