iCAx开思网

标题: 【求助】工存圖中如何做對稱結構的中心線！ [打印本页]

作者: ericwu 时间: 2002-10-13 23:09
标题: 【求助】工存圖中如何做對稱結構的中心線！
3D-2D,工存圖中如何做對稱結構的中心線！

作者: wudaoyu 时间: 2002-10-14 09:33
我也不知道啊！
我都用凹凸喀的！

作者: rubbin 时间: 2002-10-14 11:35
先在Part中做好軸,然后再在工程圖中將其顯示出來即可.用Show/Erase.

作者: wudaoyu 时间: 2002-10-14 11:47
:I:I:I:I:I:I

可以詳細的介紹一下步驟嗎？我是工程圖的菜鳥！

作者: ____ 时间: 2002-10-14 15:14
rubbin的方法:
1.view==>show&erase...==>
也可以这样:
2.在part中画一条基准曲线,然后把它的线型改为中心线.(part中,modify ==>Lline style..)

作者: peter liu 时间: 2002-10-15 20:19
ericwu: 你是宏鉅光電出來的吧，知道我是誰嗎？老同事。

作者: jxwcb 时间: 2002-10-18 21:51
:

how to control dimesion text and dimension line color individually?
please tell me! thanks

作者: jxwcb 时间: 2002-10-18 22:01
xx(:~)

xx( to IceFai and friends:
but you how to control the central line just lies in the middle of symmetric
geometries . eg: I have drawed a rectangle feature (not a revolve feature)
then I want to draw a horizontal central line and a vertical central line in the real rectangle center to dimension it. how to do it

:?):~)

作者: boby 时间: 2002-10-19 01:03
hello jxwcb,
  you can build any datum axis in part model,
and show the axis in your drawing. you can also
control the axis location by relations.

作者: shunhe_yu111 时间: 2002-10-21 17:03
I agree IceFe

作者: 孤独剑 时间: 2002-10-21 17:05
oh my gud!!
my english is very poor!!!
i don't see your

作者: jiangli 时间: 2002-10-21 17:43
明明是中国人却不说中国话,喜欢乱放洋屁,TMD真叫人恶心!

作者: jxwcb 时间: 2002-10-21 19:27

HELLOW BOBY:
   THANK YOU VERY MUCH FOR ONE QUESTION FOR!
    BUT I HAVE ANOTHER A QUESTION:
       HOW TO CONTROL DIMENSION LINE AND DIMENSION TEXT COLOR INDIVIDUALLY
    THANKS!

欢迎光临 iCAx开思网 (https://www.icax.org/)