iCAx开思网

标题: 【求助】作工程图，无法使用自己定义的标注尺寸的属性 [打印本页]

作者: ldf1998 时间: 2004-5-28 10:58
标题: 【求助】作工程图，无法使用自己定义的标注尺寸的属性
如图，想把已经定义好了的标注尺寸的属性，设置为默认的属性，以方便后来的标注，set as default 为灰色。
不知道，该怎么处理？

作者: ldf1998 时间: 2004-5-28 13:17
在V5R9上使用还好好的，不知道是不是在哪里设置的问题，找了好久（用的是R13版本）。。。

作者: zhaxia 时间: 2004-5-28 13:53
This functionality is only available with drawings created with versions up to V5 R10.
This functionality is not available with drawings created with version V5 R11 and later, nor with drawings created with older versions and whose standard has been updated or changed in V5 R11 and later. These drawings use the styles which are defined in the standard used by the drawing. Standards are managed by the administrator.

作者: bf109 时间: 2004-5-28 14:02

zhaxia wrote:
This functionality is only available with drawings created with versions up to V5 R10.
This functionality is not available with drawings created with version V5 R11 and later, nor with drawings created with older versions and whose standard has been updated or changed in V5 R11 and later. These drawings use the styles which are defined in the standard used by the drawing. Standards are managed by the administrator.

越升级越回去了

作者: ldf1998 时间: 2004-5-28 14:06

zhaxia wrote:
This functionality is only available with drawings created with versions up to V5 R10.
This functionality is not available with drawings created with version V5 R11 and later, nor with drawings created with older versions and whose standard has been updated or changed in V5 R11 and later. These drawings use the styles which are defined in the standard used by the drawing. Standards are managed by the administrator.

谢谢zhaxia兄，以管理员身份进去更改设置，是吗？

作者: zhaxia 时间: 2004-5-28 15:15

ldf1998 wrote:

谢谢zhaxia兄，以管理员身份进去更改设置，是吗？

不是

意思是这个功能只能应用在10版本或以前的drawing（你试试打开10版本或更早版本的文件可以使用此功能的，在R13中打开也可以，主要是drawing文件的版本要早），11版或更高版的drawing就不能使用此功能了，要以管理员的身份到标准中去改

作者: ldf1998 时间: 2004-5-28 15:36

zhaxia wrote:

  
不是意思是这个功能只能应用在10版本或以前的drawing（你试试打开10版本或更早版本的文件可以使用此功能的，在R13中打开也可以，主要是drawing文件的版本要早），11版或更高版的drawing就不能使用此功能了，要以管理员的身份到标准中去改

越升级越麻烦了

作者: guguflycad 时间: 2004-5-29 19:16
请问怎么进入管理员？谢谢了！

作者: ldf1998 时间: 2004-5-29 19:24

guguflycad wrote:
请问怎么进入管理员？谢谢了！

看精华贴。。。

作者: 4x4 时间: 2004-6-2 16:58
看看OPTION-DRAFTING最后一页是不是选中了“PREVENT SET AS DEFAULT"........选项

作者: 4x4 时间: 2004-6-3 21:23

zhaxia wrote:
This functionality is only available with drawings created with versions up to V5 R10.
This functionality is not available with drawings created with version V5 R11 and later, nor with drawings created with older versions and whose standard has been updated or changed in V5 R11 and later. These drawings use the styles which are defined in the standard used by the drawing. Standards are managed by the administrator.

刚才又看了一下，10以上的版本OPTION中设置不管用。只能进入管理员模式搞了。TNND,麻烦！！！！！

作者: ldf1998 时间: 2004-6-4 09:40
这一点感觉不是很爽。。。

作者: gugufly 时间: 2004-6-8 17:17
这个问题怎么解决！请斑主帮忙呀！
在Ｒ１Ｏ中一切ＯＫ！怎么在Ｒ１２中就没法解决！

欢迎光临 iCAx开思网 (https://www.icax.org/)