iCAx开思网

标题: Bock & Klingenberg在使用iMachining 3D加工时节约40%和77%的加工时间 [打印本页]

作者: 小于 时间: 2016-11-14 13:45
标题: Bock & Klingenberg在使用iMachining 3D加工时节约40%和77%的加工时间
Bock & Klingenberg在使用iMachining 3D加工时节约40%和77%的加工时间，详情请查看网址：https://www.solidcam.com.cn/successes/imachining-successes/imachining-basari-hikayeleri/article/imachining-3d-reduces-cycle-time-for-workpieces-in-aluminum-by-40-stainless-steel-by-77/?tx_news_pi1%5Bcontroller%5D=News&tx_news_pi1%5Baction%5D=detail&cHash=b0e6a0a3a0ccadab00c44da3ddfda715

[attach]1241268[/attach]

欢迎光临 iCAx开思网 (https://www.icax.org/)